CLAMP POWER METER

KEW 2060BT

Extremely large jaw with tear drop shape:
ideal solution for busbar and large currents!

Current up to 1000A rms
Voltage up to 1000V rms
Harmonics up to 30th
KEW 2060BT has a newly designed special jaw shape for using at a large busbar Extremely large jaw with tear drop shape can clamp a large busbar with safe
(Conductor size 75mm, Busbar 80mm x 30mm)

3D View

Video

Product Overview

１．Various measurement functions

Measurements of current, voltage, power, harmonics and phase detection are possible.
True RMS: Indicates a correct value at the distorted waveform.
Functions of PEAK, MAX, MIN, AVG are available.
Easy to check the temporal change in the power source.
LCD can display simultaneously the values of voltage and frequency or power and power factor.

2．Power measurement

Power measurement on any wiring system is possible.

KEW 2060BT can perform Single-phase 2-Wire / Single-phase 3-Wire and balance and unbalance measurements of Three-phase 3-Wire / Three-phase 4 Wire. The double display can simultaneously show many parameters like W & PF, W & deg, W & VA, W & Var, V & A, etc.

Various parameters such as active/reactive/apparent power, power factor, phase differences (1P2W only) which are required for the power measurement can be measured.

Total 3-phase power can be measured in simple steps.

By setting the CT and VT ratio and measuring the secondary side of the transformation, the primary side value can be obtained.

3．Harmonics measurement

Harmonics of the voltage and current, which cause various failures at the field, can be measured.
It is possible to measure and show each voltage and current harmonics up to 30th.
Total harmonics distortion factor is in two types of THD-R and THD-F. Each degree of harmonics can be shown on the LCD of the tester. Both the current value (or voltage value) and the content ratio can be displayed on the same screen.

4．Phase detection

5．Connectivity

Dedicated Application "KEW Power＊" supports both Android™ and iOS.
LCD display can be checked at the smart devices.
Measured values and graphs can be stored with a press of a button.
Voltage and current can be shown in the waveform display. Existence of the harmonics can be found easy.
Threshhold of each measured value can be set at the applicaion, and PASS and FAIL judgement is possible.

Measurement Data Monitoring Application "KEW Power＊"

It is available for free in the Google Play Store and App Store.
Please search "KEW Power"
Communication charge may be incurred separately to download application.

Supporting Android™ Ver. 8 to 15
Supporting iOS 10.0 or later

Specification

ACV
Wiring connections		1P2W, 1P3W, 3P3W, 3P4W
Measurements and parameters		Voltage, Current, Frequency, Active power, Reactive power, Apparent power, Power factor(cosθ), Phase angle, Harmonics(THD-R/THD-F), Phase rotation

	Range	1000V
	Accuracy	±0.7%rdg±3dgt (40.0 - 70.0Hz) ±0.3%rdg±5dgt (70.1Hz - 1KHz)
	Crest factor	1.7 or less
ACA

	Range	40.00/400.0/1000A (3 range auto)
	Accuracy	±1.0％rdg±3dgt (40.0 - 70.0Hz) ±2.0％rdg±5dgt (70.1Hz - 1kHz)
	Crest factor	3 or less on 40.00A/400.0A range, 3 or less 1500A peak on 1000A range
Frequency

	Display Range	40.0 - 999.9Hz
	Accuracy	±0.3％rdg±3dgt
Active power

	Range	40.00/400.0/1000kW
	Accuracy	±1.7%rdg±5dgt (PF1, sine wave, 45 - 65Hz)
Apparent power

	Range	40.00/400.0/1000kVA
	Accuracy	±1dgt against each calculated value Sum: add errors of each channel, 3P3W: ±2dgt, 3P4W:±3dgt
Reactive power

	Range	40.00/400.0/1000kVar
	Accuracy	±1dgt against each calculated value Sum: add errors of each channel, 3P3W: ±2dgt, 3P4W:±3dgt
Power factor

	Display Range	-1.000 - 0.000 - +1.000
	Accuracy	±1dgt against each calculated value Sum: add errors of each channel, 3P3W: ±2dgt, 3P4W:±3dgt
Phase angle (1P2W only)

	Display Range	-180.0 - 0.0 - +179.9
	Accuracy	Within ±3.0°
Harmonics RMS(Content rate)

	Analysis order	1st - 30th order
	Accuracy	±5.0％rdg ± 10dgt (1 - 10th) ±10％rdg ± 10dgt (11 - 20th) ±20％rdg ± 10dgt (21 - 30th)
Total harmonics THD-R/THD-F

	Display Range	0.0% - 100.0%
	Accuracy	±1dgt against the calculated results of each measured value
Phase rotation		ACV 80 - 1100V (45 - 65Hz)
Other functions		MAX/MIN/AVG/PEAK, Data hold, Bluetooth^®, Backlight, Auto power off
General

	Communication interface	Bluetooth^® 5.0
	Power source	LR6 (AA) (1.5V) ×2
	Continuous measuring time	Approx. 58 hours
	Conductor size	φ75 mm max. (busbar of 80mm × 30mm)
	Dimension / Weight	283(L) × 143(W) × 50(D) mm / Approx. 590g (including batteries)
	Applicable standards	IEC 61010-1, IEC 61010-2-032, IEC 61326-1,2-2 ClassB CAT Ⅳ 600V / CAT Ⅲ 1000V Pollution degree 2
	Accessories	7290 (Test leads) 9198 (Carrying Case) LR6(AA)×2, Instruction Manual

* Some countries regulate the compliance with their Radio Law of the products equipped with Bluetooth^Ⓡ.
　Please confirm it with your distributor before purchasing our products equipped with Bluetooth^®.