MODEL 8004|MULTI-TRAN|PRODUCTS|KYORITSU

Font Size
Small
Medium
Large

MULTI-TRAN

MODEL 8004

MODEL 8004
Discontinued products
Adaptor designed to increase the measuring capability of your clamp meters.
With the use of the multi-tran you can not only extend current ranges but also clamp on a conductor of larger diameter.

HOW TO USE

Clamp your instrument around the pick-up coil of the multi-tran.
Then, clamp the transformer jaws of the multi-tran on the conductor, as shown below.
Multiply the reading of your clamp meter by 10 to obtain the current value measured.

Measuring Range 0 - 1000A AC
Ratio/Range 10 : 1 (input to output)
Accuracy ±3% of full scale
Allowable 0 - 1000A (continuous), 1000 - 1500A (10 minutes max.)
Measurement Time 3000A (30 seconds max.)
Conductor Size Ø60mm max. (50 × 75mm)
Frequency Response 50Hz/60Hz
Withstand Voltage 3000V AC for 1 minute
Dimensions 240(L) × 85(W) × 30(D)mm
45(L) × 40(W) × 10(D)mm Output coil
Weight 490g approx.
Accessories 9022(Carrying Case)
For use with 2002PA, 2002R, 2004(AC only), 2006, 2007A(AC only),
following models * 2009A(AC only), 2017, 2027, 2031, 2033(AC only), 2037(AC only),
2040(AC only), 2046R(AC only), 2055(AC only), 2056R(AC only),
2412, 2417, 2431, 2432, 2433, 2433R, 2434, 2608A, 2805,
8113(AC only)

* These Multi-Trans can not be used for leakage current measurement.

  • Inquiry by e-mail