COMPANY
Language
CONTACT

MENU

KEW 6315 Firmware、KEW Windows for KEW 6315

Applicable model

  • KEW 6315

CAUTION

Both the Firmware and KEW Windows for KEW 6315 are required to upgrade to the updated version in order that your KEW 6315 works normally.
*Version can be checked here.

The latest version as of Jan. 16, 2024

  • Firmware: Ver 3.10
  • KEW Windows for KEW 6315: Ver 1.90 (Dec., 2022 updated)

Firmware (ENG / FRA / ESP / POL / TUR)

We ask you to register the serial number of your 6315 in order to install the software for the firmware.
* Serial number can be checked here.

How to install:

Please input the serial number of your 6315, and click "Next".
Note:Please use letters in capital.

Serial No.

Operating System

 Version File
- V3.10
-

Firmware (ENG / KOR / CHN)

We ask you to register the serial number of your 6315 in order to install the software for the firmware.
* Serial number can be checked here.

How to install:

Please input the serial number of your 6315, and click "Next".
Note:Please use letters in capital.

Serial No.

Operating System

 Version File
- V3.10
-

KEW Windows for KEW 6315

Operating System

 Version File Language
Windows 11/10 V1.90 [English]
[French]
[Korean]
[Netherlands]
[Poland]

How to install:

When "KEW Windows for KEW 6315" has been installed in your computer, be sure to uninstall it via Add/Remove Programs in Control Panel.
Then install new "KEW Windows for KEW 6315".

  1. Click the upper file name, it will be automatically download to the folder you chose.
  2. Double-click "KewWin6315v190Inst_xxx.exe".
    Installation starts after the file is unzipped. Follow the instruction displayed.

USB Device Driver

Operating System

 Version File
Windows 11/10 -

How to install:

  1. Save "kewusb101_setup.exe" to your desktop, and start it.
  2. Then it is uncompressed. Select a folder to save the file.
  3. Double-click "kewusb102_setup.exe", then installation starts.
  4. Refer to the install manual below.

How to check the version of your KEW 6315

Firmware

  1. Press the power key Power Button until the power is on and the display appears as per the figure.
  2. The part circled in red at the figure is the information for the version.

KEW Windows for KEW 6315

  1. Operate the KEW Windows for KEW 6315.
  2. The part circled in red at the figure is the information for the version.

How to check the serial number

  1. Please see the rear of your KEW 6315 unit.
    The number circled in red in the right picture is the serial number.
  2. Please input this number.

Version history

Firmware

Version Date Remark
3.10 Mar.2023
  • Problems related to the recording intervals on Quick start guide are solved.
3.00 Sep.2021
  • Supports Bluetooth5.0.
  • Supports KEW 8135 Flexible Clamp Sensor.
  • Event data display problem on KEW Windows for KEW6315 is solved.

1.60

 Feb.2018
  • Sensor detection problems in quick start guide have been solved.

1.50

 Jul.2022
  • Supports new flexible clamp sensor KEW8133.
1.41 Dec.2017
  • Defect fixed that causes incorrect event detection at inrush current measurements.
  • Defect fixed that causes incorrect wave data display when a transient event occurs.
  • Improved Time period recording.
1.31 Jul.2016
  • In the language environments other than Japanese,the problem that the threshold values for power quality event after system reset don’t correspond to nominal voltages was solved.
1.30 Feb.2016
  • Serial number display has been added on start-up and setup screens.
1.22 Aug.2015
  • Arithmetic process errors at the Wiring setting: 3P3W-1 have been solved.
1.20 Apr.2015
  • Supports additional languages: Polish
  • Start guide update
1.12 Sep.2014
  • Supports additional languages: Chinese
1.11 Jul.2014
  • The problem that wrong judgements given after wiring check was solved.
1.10 Apr.2014
  • Supports additional languages:
  • French, Spanish and Korean
1.01 Mar.2014
  • Initial issue

KEW Windows for KEW 6315

Version Date Remark
1.90 Dec.2022
  • Support Windows 11.
  • Event drawing problem is solved.
  • Report output function problem is solved.
1.81 Sep.2021
  • Supports KEW 8135 Flexible Clamp Sensor.
  • Event drawing problem is solved.
1.80 Dec.2020
  • Supports additional language: Polish.
  • The following problem is solved.
    --Saved data is not displayed if any name is assigned to ID in the Data Management Viewer.
1.70 Nov.2019
  • Selectable currency on report output function has been updated.
1.62 Feb.2018
  • Defects relating to summary report output are fixed.
1.61 Mar.2018
  • Manual for KEW6315 is updated.
1.60 Feb.2018
  • Supports new flexible clamp sensor KEW8133
1.51 May.2017
  • Corrected some errors in configuring the instrument.
  • Partly modified the report function.
  • Added Report function. (for Korean version only)
1.30 Nov.2016
  • Added French and Dutch language support.
1.20 Apr.2016
  • Driver is updated to support Windows 10.
1.12 Mar.2016
  • For Korean Version, date format on EN50160 viewer has been modified.
1.11 Feb.2016
  • Notes for outputting harmonics data in CSV format have been added.
  • Date marked on EN50160 Analysis Report has been changed in English. (For Korean Version)
  • Failure triggered by hiding graph in event viewer has been solved.
  • Display problem – showing incorrect integrated value at report output – is fixed.
1.10 Sep.2014
  • Addition of new function

EN50160 Report creation and export.
1.03 Jul.2014
  • Added Korean language support.
1.02 May.2014
  • Problems sometimes occur during Harmonics and Power Quality Event data Analysis when using PCs (other than English OS) are solved.
1.01 Mar.2014
  • Initial issue