PORTABLE APPLIANCE TESTER
Replacement Products
Discontinued products
The Model 6201 is a hand-held portable appliance tester, performing four functions to ensure the Safety of ClassI, ClassII and ClassIII 240V appliances. And also can measure the mains voltage.
Readings are displayed on a large liquid crystal display (LCD) below which are three LEDs which unambiguously display a pass or fail indication for threshold values dic-tated by AS/NZS 3760
This instrument is suitable for performing tests as required by the following standards.
AS/NZS 3760:2001 In-service safety inspection and testing of electrical equipment
Specification
RPE Protective Conductor Test |
RINS Insulation Resistance |
|||
---|---|---|---|---|
Measuring Range |
0 - 19.99Ω | Rating | 500V/200MΩ | 250V/200MΩ |
Measuring Range |
0 - 19.99/0 - 199.9MΩ (2ranges auto) |
|||
Resolution of Measurement |
10mΩ | Resolution of Measurement |
10kΩ/100kΩ | |
Short Circuit Current |
200 - 250mA DC | Output Voltage | 500V DC (+20%/-10%) @1MΩ |
250V DC (+20%/-10%) @1MΩ |
Open Circuit Voltage |
±5.0 ±0.4V DC | Current | 10mA DC or less | |
Accuracy | ±(2%rdg+3dgt) | Accuracy | ±(2%rdg+3dgt) | |
VOLT AC Voltmeter |
||||
Measuring Range |
180 - 260V (50/60Hz) |
|||
Resolution of Measurement |
1V | |||
Accuracy | ±(2%rdg+3dgt) |
General | ||
---|---|---|
Supply Voltage | 207 - 264V | |
Frequency | 50/60Hz±1% | |
Dimension | 185 (L) × 167 (W) × 89 (D) mm | |
Weight | 1kg | |
Applicable Standards |
IEC 61010-1 | CAT III 300V, Pollution Degree2 |
IEC 61326-1 | EMC requirements | |
Accessories | 7123 (Power Cord (AU)) 7129 (Test lead with alligator clip) 7101 (Flat Test Bar) 7140 (Adapter for Extension Cord) Probe Case Shoulder Strap Instruction Manual |
Catalog & Document
-
- Instruction Manual