General & Technical FAQ|CUSTOMER SUPPORT|KYORITSU

Font Size
Small
Medium
Large

General & Technical FAQ

Search by keyword
The pointer does not deflect. (=Unable to measure.)
Unable to measure the current.
Unable to measure the resistance.
The pointer moves abnormally.
The pointer does not move to zero even by the zero ohm adjustment knob.
When the power is tuned on, nothing is displayed in the LCD.
The readings vary at the DC voltage range when the test is off.
The readings do not vary when the test is on.
The pointer does not deflect. (=Unable to measure.)
Unable to measure the resistance.
The readings fluctuate when measuring current.
The transformer jaws beat when measuring large current.
The pointer moves abnormally.
The pointer does not move to zero even by the zero ohm adjustment knob.
When the power is turned on, nothing is displayed in the LCD.
When the range is set to DC voltage, the readings vary although measuring nothing.
The readings remain displayed in the LCD.
The pointer does not deflect when testing BATT. CHECK.
POWER-ON INDICATION LED does not light up when testing insulation.
POWER-ON INDICATION LED does not light up when testing AC voltage.
The pointer deflects only at testing BATT. CHECK.
The instrument sounds when measuring.
The pointer moves abnormally.
When the power is tuned on, nothing is displayed in the LCD.
The pointer does not deflect. (=Unable to measure.)
When selecting Earth Voltage range, the LED lights up although the test leads is not connected.
At the earth resistance ranges. Even though the prove is not connected, when the test button is pressed the LED lights up and the pointer deflects to the end.
When measuring the earth resistance, the OK lamp does not light up.
The pointer moves abnormally.
When the power is tuned on, nothing is displayed in the LCD.
Unable to measure. ("nc" is displayed.)
Unable to measure. ("Err" is displayed.)
Inaccurate readings
Nothing is displayed in the LCD.
Battery symbol is blinked in the LCD.
The readings fluctuate.
When the leak logger is connected to the PC using the USB cable, the leak logger connected is not detected in the logger list.
When other USB device is connected, the PC goes to install the KEW LOGGER driver. How to delete entirely the KEW LOGGER USB driver?
When trying to transmit the data, the following message appears. "Remove and insert the USB cable once."
When installing the USB driver with the hardware WindowsXP, the following remark appears. "The software you are installing for this hardware: KEW LEAK LOGGER 5000/5001 has not passed Windows Logo testing to verify its compatibility with Windows XP."
Communication between KEW Windows for KEW6305 and KEW6305 unit fails while using Bluetooth communication.
When you cancel the install operation in progress or fail to install the USB driver, it cannot be reinstalled.
Wish to remove the USB driver for KEW POWER METER completely since the install of the driver for "KEW POWER METER 6300" starts automatically when connecting other USB devices.
When installed the KEW POWER PLUS software, the personal computer did not recognize the Model 6300.
When transferring the data between the model 6300 and the personal computer, the display indicates "Timer out error".
Recorded data cannot be transferred to the personal computer.
When inserted the CF card, Model 6300 does not recognize the CF card. At the setting for CF card at the item No.19 to select "use" or "not use", the key indicator can not be changed from "off" to "on".
How to reset the file number starting with "001"?
The recorded data did not remain.
"Err.004" appears on the LCD when power is ON.
Even if trying several times to set the clock at the current time, it becomes incorrect.
The measurements are in a big error.
Current can be measured but voltage cannot be measured ("--- V" indication)
"0A" is indicated in the display when measuring the current.
Although without regenerative electric power, the active power (W) indicates minus value.
The reactive power (Var) or Power factor (PF) measurement indicates minus.
Neutral current (An) is not displayed.
When starting to measure the integration power, the recording starts after the previous measured data.
How to check the instantaneous value while measuring/recording the integration value.
Is it possible to measure only the voltage?
Recording does not stop at the stop time and date which are set.
What are the measuring ranges for each clamp sensor?
CSV file data cannot be read with "KEW POWER PLUS 2", "PQA MASTER".