KYORITSU
HOME

PRODUCTS
   • Multimeters
   • Voltage Testers
   • Clamp Meters
   • Loggers
   • Insulation Testers
   • Earth Testers
   • LOOP/PFC/PSC
     Testers
   • RCD Testers
   • Multi Function Testers
   • Portable Appliance
     Testers
   • Power Meters
   • Sensors, Multi-Trans,
     Clamp Adaptors
   • Others
   • Accessories
   • Discontinued Products

 
Flicker Sensor

KEW 8325F
 
Applicable model tableApplicable model table
 
Can measure Flicker in combination with KEW6310.

For use with following model
6310
8325F
Max. input voltage |AC 600Vrms, 848.4Vpeak
Input method |Differential input
Output voltage |AC 0 - 600mV (output/input: 1mV/V)
Measurement range |6 - 600V
Accuracy
(Frequency range)
|±0.5%rdg±0.1mV (50/60Hz)
Operating Temperature and Humidity Ranges |0 - 40ºC, less than 85% RH (no condensation)
Input impedance |Approx. 3.2MΩ
Output impedance |Approx. 1kΩ
Environment condition |Altitude up to 2000m in indoor
Applicable standards |IEC/EN 61010-1:2001 Measurement CAT III 600V, pollution degree 2
|IEC/EN 61010-031:2002, IEC 61326:2001 (EMC standard)
Withstand voltage |AC 5350V (actual value 50/60Hz) / for 5 seconds interval
|measurement terminal and exterior main body
External dimensions/mass |87(L)×26(W)×17(D)mm (protrusions omit) /
|Approx. 135g
Length |Approximately 2m
Output terminal |MINI DIN 6PIN
Accompanying items |Instruction manual
Option |7197 (Small safety clip)

PageTop

Copyright(c)2004 KYORITSU ELECTRICAL INSTRUMENTS WORKS, LTD. Sitemap | Contact Us | Terms of Use | Privacy Policy