KYORITSU
HOME

PRODUCTS
   • Multimeters
   • Voltage Testers
   • Clamp Meters
   • Loggers
   • Insulation Testers
   • Earth Testers
   • LOOP/PFC/PSC
     Testers
   • RCD Testers
   • Multi Function Testers
   • Portable Appliance
     Testers
   • Power Meters
   • Sensors, Multi-Trans,
     Clamp Adaptors
   • Others
   • Accessories
   • Discontinued Products

 
Portable Appliance Testers

MODEL 6201
   
 

The Model 6201 is a hand-held portable appliance tester, performing four functions to ensure the Safety of ClassI, ClassII and ClassIII 240V appliances. And also can measure the mains voltage.
Readings are displayed on a large liquid crystal display (LCD) below which are three LEDs which unambiguously display a pass or fail indication for threshold values dic-tated by AS/NZS 3760
6201
CE
 
This instrument is suitable for performing tests as required by the following standards.
AS/NZS 3760:2001 In-service safety inspection and testing of electrical equipment
   
 
RPE
Protective Conductor Test
RINS
Insulation Resistance
Measuring
Range
0 - 19.99Ω Rating 500V/200MΩ 250V/200MΩ
Measuring
Range
0 - 19.99/0 - 199.9MΩ
(2ranges auto)
Resolution of
Measurement
10mΩ Resolution of
Measurement
10kΩ/100kΩ
Short Circuit
Current
200 - 250mA DC Output Voltage 500V DC
(+20%/-10%)
@1MΩ
250V DC
(+20%/-10%)
@1MΩ
Open Circuit
Voltage
|±5.0 ±0.4V DC Current 10mA DC or less
Accuracy |±(2%rdg
|+ 3dgt)
Accuracy |±(2%rdg
|+3dgt)
VOLT
AC Voltmeter
 
Measuring
Range
180 - 260V
(50/60Hz)
Resolution of
Measurement
1V
Accuracy |±(2%rdg
|+3dgt)
General Supply Voltage 207 - 264V
Frequency 50/60Hz±1%
Dimension 185 (L) × 167 (W) × 89 (D) mm
Weight 1kg
Applicable
Standards
IEC 61010-1 CAT III 300V, Pollution Degree2
IEC 61326-1 EMC requirements
Accessories 7123 (Power Cord (AU))
7129
(Test lead with alligator clip)
7101 (Flat Test Bar)
7140 (Adapter for Extension Cord)
Probe Case
Shoulder Strap
Instruction Manual
 

PageTop

Copyright(c)2004 KYORITSU ELECTRICAL INSTRUMENTS WORKS, LTD. Sitemap | Contact Us | Terms of Use | Privacy Policy