|
|
 |
Multi Function Testers |
 |
6016 |
| |
|
| |
 |
 |
 |
The KEW 6016 Multi-Function tester performs 10 functions
in one instrument. |
| • |
Continuity tester |
| • |
Insulation resistance tester |
| • |
Loop impedance tester |
| • |
PSC tester |
| • |
PFC tester |
| • |
RCD tester |
| • |
Earth tester |
| • |
Phase rotation tester |
| • |
Voltage measurement |
| • |
Frequency measurement |
|
|
|
6010B |
| |
|
| |
|
| • |
Continuity: 20/200Ω, 200mA Test Current |
| • |
Insulation: 500/1000V, 20/200MΩ, 1mA Rated Test Current |
| • |
Loop Impedance: 20/2000Ω, 15mA Test Current at 2000Ω (No RCD Trip) |
| • |
RCD: 10/30/100/300/500mA x1/2, x1, Fast Trip(40ms), DC, Auto Ramp |
| • |
Test of a large kind of RCD's:
Standard, Selective, AC and A (DC sensitive breakers) |
| • |
Uc (Contact Voltage): 100V |
| • |
Designed to IEC 61010-1, IEC 61557 |
| • |
Data Memory: 300 measured results |
| • |
The stored data can be transferred to PC via Optical Adaptor Model 8212-USB or 8212-RS232C. |
|
|
 |
6010A |
| |
|
| |
|
| Continuity and Insulation Testing |
| • |
Live circuit warning LED:
Immediate illumination of a warning lamp if the circuit under test is live |
| • |
Auto Discharge:
Allows fast and safe discharge of electrical energy stored in capacitive circuits following testing |
| • | Integral overload protection on internal continuity and insulation test circuitry |
| • |
Autoranging |
| • |
500V DC test voltage for insulation tests |
| • |
200mA short circuit current on continuity ranges |
| |
|
| Loop and RCD Testing |
| • |
Wiring connection check LED's:
Immediate indication if wiring of circuit under test is correct |
| • |
Overheat Protection:
Rapid detection of overheating of internal circuitry,display of warning signal to user and automatic halting of measurement |
| • |
Supply Voltage Indication:
Can display supply voltage value in loop impedance mode |
| • |
Low Current Loop Impedance Test:
Short duration low test current will prevent tripping of many passive RCDs |
| • |
Auto Data Hold:
Retains displayed reading for set period following test |
| • |
Phase Angle Selection:
Selection of test current from +ve or -ve half cycle of waveform can prevent tripping of polarized type RCDs |
|
|
|
6011A |
| |
|
| |
|
| • |
Complies with IEC 61557 |
| • |
Designed to IP 54 Rating |
| • |
Live circuit and wiring connection check LED's |
| • |
Triple ranges insulation tests at 250, 500 and 1000V |
| • |
Triple range loop and PSC tests 15mA test current at 200Ω/2000Ω range (No RCD Trip) |
| • |
Phase angle selection on RCD ranges |
| • |
Polarity switch for continuity tests |
| • |
Auto-null facility for continuity tests |
| • |
Earth probe for loop impedance testing on extraneous metalwork |
| • |
Contact Voltage Reading |
| • |
Test of a large kind of RCD's:
Standard, Selective, AC and A (DC sensitive breakers) |
|
|
|
6017/6018 |
| |
|
| |
|
| • |
Designed to meet IEC 61010-1 CAT.III 600V |
| • |
Test leads with remote control switch.
(For insulation&Simplified Earth Test) |
| • |
Back light function. |
| • |
Color coded scales and range switch position for easy reading. |
| • |
Automatic warning when resistance of auxiliary earth spikes is in excess of tolerance. |
| • |
Can be hung around the neck for both hand’s operation. |
|
|
|
6020/6030 |
| |
|
| |
|
| • |
Water resistant (IEC 60529 IP57) |
| • |
Test leads are stored in a cord reel module |
| • |
Easy-to-read large digital display |
| • |
The instrument automatically turns itself off in about 30 minutes to conserve battery life, if no push buttons are pressed. |
| • |
Illumination on test probes for work at night or in dimly lit locations |
| • |
Display back-light to improve legibility in poor lighting conditions |
| • |
Autoranging; three ranges for insulation resistance, two ranges for earth resistance and two AC voltage ranges |
| • |
The instrument and all accessories in one carrying case |
| • |
AC voltage range; |
| |
| • |
True RMS sensing permits accurate measurement of voltage with distortion and harmonics generated by equipment using SCRs or TRIACs. |
|
| • |
Insulation resistance range; |
| |
| • |
Three test voltages; Model 6020 (125V, 250V, 1000V) |
| • |
Three test voltages; Model 6030 (250V, 500V, 1000V) |
| • |
1mA test current at the minimum load. |
| • |
Automatically releases electric charges stored in the circuit under test. |
| • |
Remaining charges can be observed on AC voltage range |
| • |
Remote control switch on a test probe |
|
| • |
Earth resistance range; |
| |
| • |
Checks resistance of auxiliary earth bars |
| • |
Can make both simplified and normal measurement |
|
| • |
Phase test; |
| |
| • |
LEDs indicate whether phase sequence is correct or reversed as well as open phase, if any. |
| • |
Rated voltage from 100V to 600V AC |
|
|
|
|
|