| Continuity
Testing |
| Measuring
Ranges | 20/200/2000Ω
(Autoranging) |
| Open
Circuit Voltage | >6V |
| Short
Circuit Current | >200mA
DC |
| Accuracy | |±(1.5%rdg+3dgt) |
| Insulation
Testing |
| Measuring
Ranges | 20/200MΩ (Autoranging) |
| Test
Voltage | 250V
500V 1000V DC |
Output
Voltage on
Open Circuit |
250V+40%-0%
500V+30%-0%
1000V+20%-0% |
| Rated
Current | >
1mA |
| Accuracy | |±(1.5%rdg+3dgt) |
| Loop
Impedance Testing |
| Rated
Voltage |
230V
AC +10%-15% [50Hz] |
| Voltage
Measuring Range |
100~250V
AC [50Hz] |
| Impedance
Ranges | 20/200/2000Ω |
| Nominal
Test Current |
25A
(20Ω range) 15mA (200Ω range) 15mA (2000Ω
range) |
| Accuracy | 20Ω
range ±(3%rdg +4dgt)
200Ω range ±(3%rdg
+8dgt)
2000Ω range ±(3%rdg +4dgt) |
| PSC
Testing |
| Rated
Voltage |
230V
AC +10%-15% [50Hz] |
| PSC
Ranges | 200A (15mA
Test Current)
2000A (25A Test Current)
20kA (25A
Test Current) |
| Accuracy |
PSC accuracy
derived from measured loop impedance specification and
measured voltage specification |
| RCD Testing |
| Rated
Voltage |
230V
AC +10%-15% [50Hz] |
| Trip
Current Settings | RCD
× 1/2 : 10,30,100,300,500,1000mA
RCD ×
1 : 10,30,100,300,500,1000mA
RCD × 5 : 10,30,100,300mA
(on × 5 ranges max current 1A) |
| Trip Current
Duration | RCD
× 1/2 × 1: 2000ms
RCD fast: 50ms |
| Accuracy | Trip
current +10%-0% of test current at 230V
Trip time
±(1%rdg + 3dgt) |
| General |
| Safety
Standard | IEC 61010-1
CAT.III 300V Pollution Degree 2
IEC 61557 |
| Withstand
Voltage | 3700V
AC for 1 minute |
| Power
Source | LR6
(1.5V) × 8 |
| Dimensions | 130(L)
× 183(W) × 100(D)mm |
| Weight |
1100g
approx. |
| Accessories |
*KAPM10
(Molded plug test leads for loop and RCD testing at
sockets)
7122B (Test leads)
7132A (External
earth probe)
Pouch for Test Leads
Shoulder Strap
Battery LR6 (1.5V) × 8
Instruction Manual |
| Optional
Accessories | 7133B (Distribution board test leads) |