|
|
 |
New Earth Clamp Tester |
 |
4202 |
| |
|
| |
 |
| Various useful functions are available on Android devices using Bluetooth communication |
| • |
Real time measurements can be transferred, shown and saved on Android device (up to 100 measurements) |
| • |
Saved data includes measurement, GPS location and date & time
Easy to check on map "When" and "Where" the measurement was made |
| • |
Comparator function on Android device informs when the measured value is lower/higher than the preset value |
|
| Earth /Ground resistance and Leakage current measurement functions |
| • |
The earth resistance from 0.05 to 1200 Ω can be measured without the auxiliary earth spikes in multi-earthing systems |
| • |
True RMS leakage or phase current readings from 0.1mA to 30.0A provides vital additional information in earthing networks |
| • |
Filter function offers increased immunity to electrical noise and a Noise mark appears in excessively high noisy environments |
|
|
 |
|
Earth Testers |
 |
4102A |
| |
|
|
| |
|
| • |
The latest circuit design permits the instrument to operate with the minimum of influence from earth voltage and earth resistance of auxiliary earth spikes. |
| • |
Dust and drip proof. (designed to IEC 529 IP54) |
| • |
Earth resistance value can be read directly from the scale. |
| • |
Designed to meet IEC 61010-1 safety standard. |
| • |
Capable of measuring earth voltage. |
| • |
Small and lightweight. Shock resistant new case material. |
| • |
2mA measuring current permits earth resistance tests without tripping earth leakage current breakers in the circuit under test. |
| • |
Lead wire connection to C and P terminals and proper auxiliary earth resistance can be checked by "OK" lamp. Lead wire connection to C and E terminals is good when "OK" lamp is illuminated. |
|
|
|
4105A |
| |
|
|
| |
|
| • |
Dust and drip proof.(designed to IEC 529 IP54) |
| • |
In addition to the facility for precision measurement, test leads for simplified two wire measuring system also supplied as standard accessories.
(unit can be hung from the neck for simplified measurement) |
| • |
Designed to meet IEC 61010-1 safety standard. |
| • |
Capable of measuring earth voltage. |
| • |
Automatic warning when resistance of auxiliary earth spikes is in excess of tolerance. |
| • |
Small and lightweight. Shock resistant new case material. |
| • |
2mA measuring current permits earth resistance tests without tripping earth leakage current breakers in the circuit under test. |
|
|
|
4300 |
| |
|
| |
|
KEW 4300 is simplified earth resistance tester
(based on 2-pole method) |
| • |
200/2000Ω (2 ranges): auto-ranging. |
| • |
Warning buzzer triggered at 100Ω or less. |
| • |
LED lights up when a large earth voltage is detected. |
| • |
Live circuit warning when 30V or higher voltage is detected.
(KEW 4300 detects voltage even when measuring resistances.) |
| • |
LED light for illuminating measurement points.
(It turns on/off automatically in relation to the ambient brightness.) |
| • |
Small test current (max 2mA) not triggering RCD. |
|
|
| |
|
Earth Resistance & Resistivity Tester |
|
4106 |
| |
| Earth Resistance & Resistivity Tester |
|
|
| |
|
Earth Resistance Measurements with 4, 3 and 2 Wires
Earth Resistivity (ρ) Measurement using WENNER method |
|
|
| |
|
Earth Clamp Tester |
|
4200 |
| |
|
|
| |
|
| • |
The earth resistance from 0.05 to 1200Ω can be measured without the auxiliary earth spikes. (The Multiple Earthing System.) |
| • |
True RMS
Accurate true RMS readings of AC current including distorted waveform from 1mA to 30.0A |
| • |
Noise Check Function
A function to detect current, which effects on an earth resistance measurement and display "NOISE" mark on the LCD. |
| • |
Memory function
Save and display up to 100 measurement data. |
| • |
Data hold function / Buzzer function / Back light function |
| • |
Compliant with Safety Standards of IEC 61010-1 : CAT.IV 300V Pollution degree2 |
|
|
|