2009R KYORITSU

• Multimeters

• Voltage Testers

• Clamp Meters

• Loggers

• Insulation Testers

• Earth Testers

• LOOP/PFC/PSC
Testers

• RCD Testers

• Multi Function Testers

• Combi Tester

• Portable Appliance
Testers

• Power Meters

• Sensors, Multi-Trans,
Clamp Adaptors

• Others

• Accessories

• Discontinued Products

AC/DC Digital Clamp Meter

2009R

Selection Guide

Product Catalogue

Instruction Manual

•	CAT.IV Clamp Meter can measure the Voltage and Current in both very low and high power circuits.
•	Accurate True-RMS reading of AC current or voltage with distorted waveform.
•	Can measure AC and DC currents up to 2000A.

AC A

400.0/2000A

	±1.3%rdg±3dgt	(0~400.0A, 150~1700A)	(45~66Hz)
	±2.0%rdg±5dgt	(0~400.0A, 150~1700A)	(20Hz~1kHz)
	±2.3%rdg±3dgt	(1701~2000A)	(45~66Hz)

DC A

400.0/2000A

±1.3%rdg±2dgt

AC V

40.00/400.0/750V

	±1.0%rdg±3dgt	(45~66Hz)
	±1.5%rdg±5dgt	(20Hz~1kHz)

DC V

40.00/400.0/1000V

±1.0%rdg±2dgt

400.0/4000Ω

|±1.5%rdg±2dgt
(Electronic protection (no fuse) up to 600V)

Continuity buzzer

Buzzer sounds below 20Ω

10.0 ~ 4000Hz

±1.5%rdg±5dgt
(Input sensitivity

Current: more than 40A

Voltage: more than 10V)

Output

Recorder :	DC400mV against AC/DC400.0A
	DC200mV against AC/DC2000A

Withstand voltage

6880V AC for 5 seconds

Conductor size

Ø55mm max.

Applicable standards

IEC 61010-1 CAT.IV 600V, CAT.III 1000V Pollution degree 2
IEC 61010-031, IEC 61010-2-032, IEC 61326-1, IEC 61326-2-1

Power Source

R6P (1.5V) × 2

Dimensions

250(L) × 105(W) × 49(D)mm

Weight

Approx. 540g (including batteries)

Accessories

7107A (Test leads), 8201 (Output plug), 9094 (Carrying case)
R6P (AA) (1.5V) × 2, Instruction Manual

Optional

8008 (Multi-Tran) (AC only), 7014 (Output cord)

| | |